- Home
- Courses
- Engineering
- Automobiles Engineering
- Manufacturing Processes II
Curriculum
- 1 Section
- 41 Lessons
- 10 Weeks
Expand all sectionsCollapse all sections
- Manufacturing Processes II41
- 2.1Lecture 1: Instructional Objectives – I
- 2.2Lecture 2: Instructional Objectives – II
- 2.3Lecture 3: On Tool Geometry
- 2.4Lecture 4: Interrelations Among The Tool Angles
- 2.5Lecture 5: Mechanism of Chip Formation
- 2.6Lecture 6: Orthogonal and Oblique Cutting
- 2.7Lecture 7: Use of Chip Breaker in Machining
- 2.8Lecture 8: Machining Forces
- 2.9Lecture 9: Analytical and Experimental
- 2.10Lecture 10: Dynamo meters for Measuring Cutting Forces
- 2.11Lecture 11: CTCEAC
- 2.12Lecture 12: CCTCFA
- 2.13Lecture 13: Concept of Machinability and its Improvement
- 2.14Lecture 14: Tool Life
- 2.15Lecture 15: Conventional Cutting Tool Maths
- 2.16Lecture 16: Advanced Tool Materials
- 2.17Lecture 17: Kinematics System of Centre Lathe
- 2.18Lecture 18: General Purpose Machine Tool Drills
- 2.19Lecture 19: Kinematic Systems and Operations
- 2.20Lecture 20: Configuration and Kinematic System
- 2.21Lecture 21: Mounting of jobs and Cutting Tools in Machine
- 2.22Lecture 22: Mounting of jobs and Cutting Tools in Machine
- 2.23Lecture 23: Construction,Operation and Tool Layout
- 2.24Lecture 24: Use of Attachments In Machine Tools
- 2.25Lecture 25: Forces Developing and Acting In Machine Tools
- 2.26Lecture 26: Estimation of Machining Time
- 2.27Lecture 27: Broaching – Principle Systems and Applications
- 2.28Lecture 28: Grinding Principle and Application
- 2.29Lecture 29: Abrasive Processes
- 2.30Lecture 30: Abrasive Processes (Grinding)
- 2.31Lecture 31: Superfinishing Processes
- 2.32Lecture 32: Production of Screw Threads
- 2.33Lecture 33: Gear Manufacturing
- 2.34Lecture 34: Jigs and Fixtures For Machine Shops
- 2.35Lecture 35: Design and Applications of Jigs and Fixtures
- 2.36Lecture 36: Non Traditional Manufacturing
- 2.37Lecture 37: Ultrasonic Machining
- 2.38Lecture 38: Water Jet Machining and Abrasive Water Jet
- 2.39Lecture 39: Electro – Chemical Machining
- 2.40Lecture 40: Electro – Discharge Machining
- 2.41Lecture 41: EBM and LBM