- Home
- Courses
- Engineering
- Architectural Engineering
- Design Of Steel Structures
Curriculum
- 1 Section
- 40 Lessons
- 10 Weeks
Expand all sectionsCollapse all sections
- Design Of Steel Structures40
- 2.1Lec-1 Introduction to Design of Steel Structures
- 2.2Lec-2 Connections
- 2.3Lec-3 Riveted Connections
- 2.4Lec-4 Design of Rivet Joint
- 2.5Lec-5 Welding
- 2.6Lec-6 Design of Fillet and Butt Welds
- 2.7Lec-7 Bolted Connection
- 2.8Lec-8 Eccentric Connections: Rivet Joints
- 2.9Lec-9 Design of Eccentric Connection With Load Lying in Plane of Joint(Rivet&Bolt)
- 2.10Lec-10 Eccentric Connection With Load Perpendicular to Plane of Riveted Joint
- 2.11Lec-11 Analysis and Design of Join with Seat Connection
- 2.12Lec-12 Eccentric Connection
- 2.13Lec-13 Load Lying Perpendicular to the Plane of Weld Joint: Fillet and Butt Weld
- 2.14Lec-14 Tension Member
- 2.15Lec-15 Design of Tension Member
- 2.16Lec-16 Design of Tension Member: Gusset Plates. Lug Angles and Tension Splices
- 2.17Lec-17 Design of Tension Member: Subjected to Axial and Bending
- 2.18Lec-18 Compression Member
- 2.19Lec-19 Design of Compression Member
- 2.20Lec-20 Design of Eccentrically Loaded Tension Member
- 2.21Lec-21 Built up Compression Member
- 2.22Lec-22 Design of Built up Compression Member
- 2.23Lec-23 Lacing for Built Up Compression Member
- 2.24Lec-24 Design of Lacing System
- 2.25Lec-25 Design of Batten PLates
- 2.26Lec-26 Introduction to Flexural Members: Beams
- 2.27Lec-27 Design Procedure of Beam Members
- 2.28Lec-28 Design of Laterally Supported Beams
- 2.29Lec-29 Design of Laterally Unsupported Beams
- 2.30Lec-30 Built-Up Beams
- 2.31Lec-31 Built-Up Beams: Curtailment of the Flange Plates and Shear Connections
- 2.32Lec-32 Design of a Built-Up Beams
- 2.33Lec-33 Design of Shear Connections and Purlins
- 2.34Lec-34 Gantry Girders
- 2.35Lec-35 Design of Gantry Girders
- 2.36Lec-36 Introduction to Plate Girders-Part 1
- 2.37Lec-37 Introduction to Plate Girders-Part 2
- 2.38Lec-38 Design of a Plate Girder
- 2.39Lec-39 Column Base Part-1
- 2.40Lec-40 Column Base Part-2